About

Do you need extra adhesive mounting pads to help complete the installation of your front or front+rear BlackVue dash cam system, or move your camera to another vehicle? These BlackVue double-sided 3M adhesive pads attach securely to your existing windshield mounts (front or rear, please choose which ones you need above) to securely attach the mounting brackets to the vehicle glass.

These sticky adhesive mounting pads are designed to be mounted on flat and smooth glass or metal surfaces. It is not recommended to place these sticky pads on plastic or rubber surfaces inside your vehicle.

Please be sure to thoroughly clean the mounting surfaces and allow them to dry before applying the sticky pads. Carefully remove the red backing piece and ensure you do not touch the exposed adhesive pad, and then press firmly once applied to the mounting bracket or to the windshield.

Specs

• Front adhesive pad (FT-90) dimensions: 48.8 mm x 26 mm (1.92 in x 1.02 in)
• Rear adhesive pad (RT-1) dimensions: 29.5 mm x 18.5 mm (1.16 in x 0.72 in)

Compatibility

The Front Adhesive Tape Pad is compatible with the following models.

• DR900X 1CH/2CH/IR (Front Mount)
• DR900S 1CH/2CH/IR (Front Mount)
• DR750X 1CH/2CH/IR (Front Mount)
• DR750S 1CH/2CH/IR (Front Mount)
• DR650S 1CH/2CH/IR (Front Mount)
• DR650GW 1CH/2CH/IR (Front Mount)
• If you cut 2mm off from two, one long and one short side of the sticker, it can be used for the DR590X/DR590W/DR590 front mount

The Rear Adhesive Tape Pad is compatible with the following models.

• DR900X-2CH (Rear Mount)
• DR900S-2CH (Rear Mount)
• DR750-2CH LTE (Rear Mount)
• DR750X-2CH (Rear Mount)
• DR750S-2CH (Rear Mount)
• DR590X-2CH (Rear Mount)
• DR590W-2CH (Rear Mount)
• DR590-2CH (Rear Mount)
• DR650S-2CH (Rear Mount)
• Most Taxi (IR) Models (Rear Mount)

Shipping

Fast dispatch and overnight NZ Post tracked courier shipping within New Zealand from drivercam.co.nz (rural approximately 3 days)